Ok... here are some pics... sorry, a bit blurry...
It turns out the woofers are JBL 123A-1 (8 ohm)
I don't know about the horn. I found no markings on it. The black rear cover is cast aluminum and the horn is plastic.
I don't know if the cabinet is home-made or if it is an Altec Lansing design. (Ed: Now I think it is DIY). It is made from 3/4 inch birch ply and its outside dimensions are: 24" (H) x 16.5" (W) x 12" (D). It doesn't have a lot of physical depth, as though it was designed around JBL 123A-1 which has a shallow basket.
In both of the 32343 cross-overs, the black plastic caps were leaking, and in one of the cross-overs, one of the 18uf caps fully exploded. I'm sure this happened before I bought these and it's probably why I got them so cheap. Cap values are: 3uf/75V; 6uf/100V; 8uf/75V; 18uf/50V.
So I was looking at replacing the old caps with Solens, since there is not a lot of room inside the control box and they are not too expensive. I've never used them though so I don't know what to expect. The old caps (marked "TSI") do appear to be a PIO cap, judging by all the paper shrapnel plastered over everything. If you guys have any suggestions on better caps, please feel free to chime in.
Thanks again,
Allen
P.S. still would like the schematic if anybody has it. thnx.
Bookmarks